- DJI doesn't update battery firmware often. Toggle signature. Mavic Air 2 Discussions Sep 26, 2020. Question about MM firmware update of batteries.
- DJI Mavic Pro Firmware Update Using DJI Assistant 2 Use the DJI Assistant 2 to update the firmware for the quadcopter and remote controller drone at the same time. With the remote controller and the aircraft powered off, connect the remote controller to a computer through the charging port using a micro USB cable.
- Dji Mavic Air Controller Firmware
- Dji Mavic Air Battery Firmware Updater
- Dji Mavic Air 2 Battery Firmware Update
- Dji Mavic Pro Firmware Update
- Dji Mavic Air Software Update
- Dji Mavic Air Battery Firmware Update 64 Bit
- Dji Mavic Air Firmware Update
Kali ini saya akan kasih tau tentang update battery firmware dji mavic mini terbaru. Air Photography 569,717 views. DJI Mavic Mini - 5 TIPS & TRICKS! - Duration: 10:38.
Knowing how to update the Mavic 2 firmware using either the DJI Assistant 2 or Go 4 app is very important.
The DJI Mavic 2 updates contain fixes and improvements to your quadcopter. It is not just the Mavic 2 quadcopter and its components which the firmware upgrade fixes and improves.
These DJI Mavic 2 firmware upgrades also contain software for the the remote controller and batteries. So it is very important to install the latest Mavic 2 firmware on your quadcopter.
The instructions to updating the Mavic 2 firmware is the same for both the Mavic 2 Pro and Mavic 2 Zoom drones. However, there is a slight difference in the firmware update process between the Mavic 2 and the older original Mavic drone.
So far, DJI have released 5 firmware updates for the Mavic 2 quadcopter.
At the end of this post, you can read the firmware releases notes, including the issues fixed and improvements. It sure is very interesting to see what has been fixed and improved on.
There are 2 ways to upgrade the Mavic 2 quadcopter and remote controller.
You can update the Mavic 2 firmware using the DJI Go 4 app or the DJI Assistant 2 app using a computer.
Below are the instructions including videos for updating the Mavic 2 Pro and Mavic 2 Zoom with the DJI Assistant 2 and DJI Go 4 apps.
On a side note, if you are having issues where the Mavic disconnects from the Remote Control or DJI Go 4 app, then read our article on fixing Mavic Pro disconnects. While this is based on the older Mavic Pro, many of the troubleshooting tips will work on the Mavic 2 quadcopters. Updating the Mavic firmware is one of the steps in fixing any flying issues you may be experiencing.
How To Update DJI Mavic 2 Firmware
Important Notes On Updating Mavic 2 Firmware
- When using the DJI Assistant 2 software on a PC, it is not possible to update both the Mavic 2 quadcopter and remote controller as the same time. They are done separately
- Visit the Mavic 2 download page and install the DJI Go 4 App on your smartphone or the DJI Assistant 2 App on your PC, depending on which method of update you choose
- Make sure your Mavic 2, remote controller, smartphone or PC have at least 50% charge in them
- Ensure that you have a strong internet signal when downloading the Mavic 2 firmware
- It is a good idea to remove the propellers from the Mavic 2 quadcopter while doing the update
- The process of upgrading the Mavic 2 firmware will restart the quadcopter a few times during the update
- Never disconnect the Mavic 2 quadcopter or remote controller from the computer or smartphone during the firmware upgrade. If this happens, then the Mavic firmware update will fail. It could even corrupt the existing firmware. Then your Mavic 2 will not fly until the correct firmware has been installed
DJI Mavic 2 Firmware Update Using DJI Assistant 2
Here are the Mavic 2 Pro And Zoom update instructions using the DJI Assistant 2 software on a PC;
- Switch the Mavic 2 quadcopter off
- Connect the Mavic 2 quadcopter to a computer using the USB type A to type C cable
- Power on the Mavic 2 quadcopter
- Open the DJI Assistant 2 application and login to your DJI account
- Select 'Mavic 2' and click on the 'Firmware Updates' on the left panel
- Select the firmware version that you wish to update to and click on 'Upgrade'
- Click on 'Start Update'
- Wait for the firmware to be downloaded and the firmware update process will start automatically
- Restart the Mavic 2 quadcopter after the firmware update is complete
- If you have more than 1 battery, then you need to follow the above procedure to update each Mavic 2 battery
NOTE: The Mavic 2 firmware update may reset some main controller settings, such as the Return To Home Altitude and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred DJI GO 4 settings, and re-adjust them after the update to suit your preference.
Update Mavic 2 Remote Controller Firmware Using DJI Assistant 2
Use the same procedure to complete the Mavic 2 remote controller firmware update to the latest version as follows;
- Switch the Mavic 2 remote controller off
- Connect the Mavic 2 remote controller to a computer using a micro USB cable
- Power on the Mavic 2 remote controller
- Open the DJI Assistant 2 application and login to your DJI account
- Select 'Mavic 2 RC' and click on the 'Firmware Updates' on the left panel
- Select the firmware version that you wish to update and click on 'Upgrade'
- Click on 'Start Update'
- The downloaded and firmware update process will start automatically
- When the upgrade process has finished, a green 'Update Complete' message will be shown
- Reboot the Mavic 2 quadcopter after the firmware update is complete
The DJI Assistant 2 software has plenty more features than updating the Mavic firmware. The DJI Assistant 2 Mavic software can be used to upload data, analyze black box logs, calibrate sensors, modify the Mavic and simulate flight. You can read more on the Mavic Pro Assistant 2 software here.
Notes on Updating the Mavic 2 Using DJI Assistant 2
- At the time of writing the Mavic 2 quadcopter and remote controller must be updated separately when using the DJI Assistant software.
This video shows you quickly how to upgrade the Mavic 2 quadcopter and remote controller to the latest firmware release using the DJI Assistant 2 app.
Update DJI Mavic 2 And RC Firmware Using DJI Go 4 App
Here are the instructions to update the Mavic 2 quadcopter and remote controller firmware to the latest release using the DJI Go 4 app;
- Connect your smartphone to the internet
- Switch off the Mavic 2 quadcopter and remote controller
- Connect your smartphone into the Mavic 2 remote controller
- Power on the Mavic 2 remote controller and then the quadcopter
- Launch the DJI Go 4 app on your smartphone or tablet device
- If an update is available, you will see 'New Firmware Update Is Available'
- Click on the 'New Firmware Update Is Available'
- Click on the 'Download Now' button. The Mavic 2 firmware file will download and the upgrade will start automatically
- When the upgrade process has finished, a green 'Update Complete' message will be shown
- Restart the Mavic 2 quadcopter after the firmware update is complete
- If you have more than 1 battery, then you need to follow the above procedure to update each Mavic 2 battery
Note: The firmware update may reset various main controller settings, such as the Return To Home Altitude and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred settings in the DJI GO 4 app, and readjust them after the update to suit your preference.
NOTE: If you require components for your quadcopter, then view this large selection of Mavic 2 parts, upgrades and accessories.
Here is an excellent video which shows you how easy it is to update the Mavic 2 Pro and Zoom firmware using the DJI Go 4 app.
DJI Mavic 2 Care Refresh
The Mavic 2 Care Refresh provides two replacement units for a small additional charge in one year and covers a wide variety of accidents, giving you greater peace of mind. Click on the below link to read the FAQ and price.
DJI Mavic 2 Firmware Update Releases Notes
Below are the Mavic 2 firmware versions released to date. It is very interesting to read about the new features, which have been added and also various issues, which were also fixed by updating the Mavic firmware software.
Mavic 2 Pro And Zoom Firmware Update Version v01.00.05.00
Release Date : 2019.09.16
- Added battery mounting detection. Aircraft is unable to take off if the Intelligent Flight Battery is not
mounted correctly. Note that DJI GO 4 v4.3.24 or later is required - Added altitude display to video captions
- Optimized auto discharging function for the Intelligent Flight Battery. Added ability to set when auto discharge will begin. The default setting is five days. Note that DJI GO 4 v4.3.24 or later is required
- Improved obstacle detection accuracy
- Improved accuracy of altitude for Exif photos
- Optimized Waypoints
Firmware Update Version v01.00.04.00
Release Date : 2019.04.17
- Added Dual Remote Controller mode (requires DJI GO 4 v4.3.16 or later)
- Fixed issue: in some photos, the GPS information displayed was incorrect when viewed on a computer
- Fixed issue: the gimbal acted abnormally after completing a QuickShot Rocket
Firmware Update Version v01.00.03.00
Release Date : 2019.01.24
- Added Waypoints (requires DJI GO 4 v4.3.12 or later)
- Enabled Lateral Vision Systems for Timelapse (see Mavic 2 Pro/Zoom User Manual for more information about obstacle sensing)
- Increased the altitude accuracy of Waypoints in Hyperlapse. When using Task Library to repeat a flight, make sure the takeoff altitude is the same
- Fixed issue: the remote controller's operating time was shortened when used with some mobile devices
- Fixed issue: could not open Sphere panorama photos in Facebook
- Fixed issue: the Intelligent Flight Battery could not be charged when the environment temperature was between 5° and 10° C
Firmware Update Version v01.00.02.00
Release Date : 2018.11.22
- Increased the shutter speed to up to two seconds for Hyperlapse Circle and Course Lock (requires DJI GO 4 v4.3.4 or later)
- Added Task Library to Hyperlapse Waypoint (requires DJI GO 4 v4.3.4 or later)
- Added Precision Landing
- Enabled Lateral Vision Systems for Point of Interest 2.0 (see Mavic 2 Pro/Zoom User Manual for more details about obstacle sensing requirements)
- Added voice alert for ActiveTrack 2.0 when the subject is lost (requires DJI GO 4 v4.3.4 or later for iOS. Android version is coming soon)
- Added on-screen display when shooting in Hyperlapse and Panorama (requires DJI GO 4 v4.3.4 or later)
- Optimized the Vision Systems status display in DJI GO 4 (requires DJI GO 4 v4.3.4 or later)
Firmware Update Version v01.00.01.00
Release Date : 2018.10.11
- Added ability to make a selection and adjust the flight speed and duration for Hyperlapse (requires DJI GO 4 v4.3.2 or higher)
- Added ability to delete Hyperlapse and Panorama RAW footage in Playback (requires DJI GO 4 v4.3.2 or higher)
- Added ability to enable and disable Vision Systems by using remote controller's C1 and C2 buttons (requires DJI GO 4 v4.3.2 or higher)
- Enabled Lateral Vision Systems for QuickShots sub-modes of Circle, Helix, and Boomerang. Refer to the Mavic 2 Pro/Zoom User Manual for more details about the requirements for obstacle sensing
- Optimized ActiveTrack 2.0
- Improved photo quality for Panorama
- Improved aircraft flight stability
Mavic 2 Pro And Zoom Firmware Update Version v01.00.00.00
Release Date : 2018.08.23
- Added Hyperlapse mode, including four sub-modes: Free, Circle, Course Lock, and Waypoints
- Added Dolly Zoom sub-mode for QuickShots (Mavic 2 Zoom only)
- Added Enhanced HDR and HyperLight shooting modes
- Added Super Resolution sub-mode for Panorama (Mavic 2 Zoom only)
- Added 2 x digital zoom (Mavic 2 Zoom only. Available when recording video in 1080p 24/25/30 fps)
- Added Emergency RTH and Emergency Landing for Low Battery RTH
- Adjusted the low battery warning level to 25%
- Improved stability for POI by optimizing the way the location of the subject is measured (Mavic 2 Zoom only)
- Fixed occasional issue in Panorama where the camera was unable to take a photo
- Improved the overall photo quality in Panorama
- Fixed the issue where the aircraft would move unexpectedly due to compass interference
- Fixed the occasional issue where the gimbal would not re-center after exiting QuickShots
- Fixed the AE flicker issue (Mavic 2 Pro only) and green point issue (Mavic 2 Zoom only)
- Improved the overall photo quality of both Mavic 2 Pro/Zoom
- Optimized the performance of the Vision Systems
- Added 2 m minimum flight altitude to ActiveTrack 2.0
- Fixed the occasional issue in QuickShots where the camera was unable to record a video
- Improved the overall video quality in QuickShots
Firmware Update Version v01.00.01.00
Release Date : 2018.10.11
- Added ability to make a selection to adjust the flight speed and duration for Hyperlapse (requires DJI GO 4 v4.3.2 or higher)
- Added ability to delete Hyperlapse and Panorama RAW footage in Playback (requires DJI GO 4 v4.3.2 or higher)
- Added ability to enable and disable Vision Systems using remote controller's C1 and C2 buttons (requires DJI GO 4 v4.3.2 or higher)
- Enabled Lateral Vision Systems for QuickShots sub-modes of Circle, Helix, and Boomerang
- Optimized ActiveTrack 2.0
- Improved photo quality for Panorama
- Improved aircraft flight stability
The Mavic Pro firmware update contains fixes to bugs and adds new features to your quadcopter. For these reasons, updating your Mavic firmware to the latest version on the quadcopter, remote controller and battery is very important.
These firmware releases are just as important for the remote controller, the battery or any of the other hardware and software components of your drone. Quite a few of the Mavic Pro updates also include updates for DJI Goggles.
So far, DJI have released 16 Mavic Pro updates since it released this quadcopter. I have a list of these firmware releases below including the setting and components which were fixed in the release. DJI are more or less releasing a new Mavic update every month.
There are 2 ways to upgrade the Mavic Pro firmware and the remote controller.
You can update using the DJI Go 4 app or the DJI Assistant 2 app using a computer. You can also update the Mavic quadcopter and remote controller separately.
Below are instructions including videos for updating the Mavic Pro with DJI Assistant 2 and DJI Go 4 apps.
After the instructions, I have listed the new features and issues which have been added and resolved with each firmware release for the Mavic Pro. In fact, it is always very interesting to read the Mavic Pro firmware release notes before you install the update. The firmware release notes will tell you what the firmware will do for your Mavic whether it will fix something or add a new feature.
There is another article on how to calibrate the Mavic Pro vision sensors which are very important. The Mavic Vision Positioning System is for obstacle detection, collision avoidance, flight stability and is also critical for gesture mode to work.
If you are having issues where the Mavic disconnects from the Remote Control or DJI Go 4 app, then read our article on fixing Mavic Pro disconnects. Updating the Mavic firmware is one of the steps.
How To Update Mavic Pro Firmware
Important Notes on Firmware Updates
- Visit the DJI Mavic download page and install the DJI Go 4 App and or the DJI Assistant 2 App depending on which method of update you choose
- Make sure your Mavic Pro, remote controller and mobile device have at least 50% charge in them. However, it is best to have them fully charged
- Ensure that you have a strong internet connection without interruption for the duration of the downloading of the Mavic firmware
- Never disconnect the aircraft from the computer during the firmware update. If this happens, then the Mavic firmware update will fail. It could also corrupt the existing firmware. Then your Mavic will not fly until the correct firmware has been installed
DJI Mavic Pro Firmware Update Using DJI Assistant 2
Use the DJI Assistant 2 to update the firmware for the quadcopter and remote controller drone at the same time.
- With the remote controller and the aircraft powered off, connect the remote controller to a computer through the charging port using a micro USB cable
- Power on the Mavic Pro Remote Controller and Mavic Pro quadcopter and make sure both are connected
- Open the DJI Assistant 2 application and login to your DJI account
- Select 'Mavic Pro' and click on the 'Firmware Updates' on the left panel
- Select the firmware version that you wish to update and click on 'Upgrade'
- Click on 'Start Update'
- Wait for the firmware to be downloaded and the firmware update process will start automatically
- Reboot the Mavic Pro quadcopter and the remote controller after the firmware update is complete
Please note that firmware update may reset various Main Controller Settings, such as the RTH Altitude and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred DJI GO 4 settings, and readjust them after the update to suit your preference.
The DJI Assistant 2 software has plenty more features than updating the Mavic Pro firmware. The DJI Assistant 2 Mavic software can be used to upload data, analyze black box logs, calibrate sensors, modify the Mavic and simulate flight. You can read more on the Mavic Pro Assistant 2 software here.
Notes on Updating the Mavic Pro Using DJI Assistant 2
- The Mavic Pro remote controller and the quadcopter can be updated separately.
- If you want to just update the Mavic Pro quadcopter, you would just connect the quadcopter to the computer using the micro USB port on the quadcopter.
- The firmware update will take about 15 minutes.
This video shows you exactly how to upgrade the Mavic pro to the latest firmware release using the DJI Assistant 2 app. It shows you also how you can upgrade the Mavic remote controller separately.
DJI Mavic Pro And RC Firmware Update Using DJI Go 4 App
Follow these instructions to update the Mavic Pro firmware to the latest release using the DJI Go 4 app;
- Switch off the remote controller and Mavic Pro
- Connect the remote controller to a cellphone or tablet device through the charging port using a micro USB cable
- Next power on the remote controller and the aircraft
- Open the DJI Go 4 app from your cellphone or tablet device
- Click on the 'Upgrade Now' button in the top right of your screen which is highlighted in red
- Click on the blue 'Download Now' button which will start to download the latest firmware release from DJI
- When the Mavic firmware file has completely downloaded, click on the blue 'Start Update' button which appears further down the screen
- When the upgrade process has finished, click the blue 'Complete' button at the bottom of the screen which will finish the process
The firmware update should take 5 minutes for the Remote Controller and 10 minutes for the Mavic Pro quadcopter.
Please note that firmware update may reset various Main Controller Settings, such as the RTH Altitude and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred DJI GO 4 settings, and readjust them after the update to suit your preference.
NOTE: If you need any components or accessories for your quadcopter, then check out our DJI Mavic Pro parts, upgrades and accessories page.
Here is an excellent video which shows you how easy it is to update the Mavic Pro firmware using the DJI Go 4 app.
DJI Mavic Pro Care Refresh
The Mavic Pro Care Refresh provides two replacement units for a small additional charge in one year and covers a wide variety of accidents, giving you greater peace of mind. Click on the below link to read the FAQ and pricing.
Previous DJI Mavic Pro Firmware Update Releases
Dji Mavic Air Controller Firmware
Below are listed the Mavic Pro firmware version released to date. It is very interesting to read about the new features which have been added and also various bugs and issues which were also resolved by updating the Mavic software.
Mavic Pro Firmware Update Version v01.04.0300
Release Date : 2018.02.09
- Fixed an issue that prevented J+R format photos from being downloaded.
Firmware is also an update for DJI Goggles;
- Added support for Mavic Air: Support for Head Tracking (requires Mavic Air remote controller firmware v01.00.0100 or later); support for shooting and viewing Pano photos; and support for downloading and viewing photos and videos.
Mavic Pro Firmware Update Version v01.04.0200
Dji Mavic Air Battery Firmware Updater
Release Date : 2018.01.11
- Pano photos are able to be viewed through the DJI Goggles
- Optimized the startup music for Mavic Pro Platinum
Firmware is also an update for DJI Goggles;
- Added support for playing local videos
- Added support for viewing local Pano photos
- Added support for downloading and viewing Pano photos from Mavic Pro
Mavic Pro Firmware Update Version v01.04.0100
Release Date : 2017.11.23
- Added Pano shooting modes (requires DJI GO 4 app v4.1.18 or higher)
- Optimized GEO Zone management
- Optimized Intelligent Flight Battery firmware updating
- Improved flight performance when using propeller guards
Firmware is also an update for DJI Goggles;
- Fixed an occasional issue where the SD card could format abnormally after linking
- Fixed an occasional issue where the linking status LED turned off after powering on
Mavic Pro Firmware Update Version v01.04.0000
Release Date : 2017.09.19
Dji Mavic Air 2 Battery Firmware Update
- Added QuickShot feature (requires DJI GO 4 app v4.1.10 or higher)
- Added Dynamic Home Point for ActiveTrack mode (requires DJI GO 4 app v4.1.10 or higher)
- Added support for Mavic Pro Platinum firmware and 8331 Low-Noise Quick Release Propellers
- Adjusted the color in Normal mode to Vivid (requires DJI GO 4 app v4.1.10 or higher)
Firmware is also an update for DJI Goggles:
- Adjusted the startup volume to be the same as the settings volume
Mavic Pro Firmware Update Version v01.03.1000
Release Date : 2017.08.22
- Fixed an occasional issue where DNG files couldn't be opened
- Fixed an occasional issue where the camera would restart automatically during recording
- Fixed an occasional issue where the gimbal would drift after self-checking
- Limited the max descend speed to 2 m/s and max ascend speed to 3 m/s in Propeller Cage mode
- Improved image quality
Firmware is also an update for DJI Goggles:
- Added Head Tracking for Spark (with firmware v01.00.0600 or later), the Inspire 2 (with firmware v01.01.0200 or later) and the Phantom 4 (with aircraft firmware v2.0.0.16 or later and remote controller firmware 1.9.3)
- Added remote controller signal strength icon
- Optimized audio quality
Mavic Pro Firmware Update Version v01.03.0900
Release Date : 2017.06.22
- Fixed DNG file white balance issues when shooting in Portrait mode
- Updated the user interface to indicate aircraft nose positioning when using Head Tracking Gimbal and aircraft range when using Head Tracking Flight
- Added imperial units and camera grids as options
- Fixed an issue where certain Camera View information wouldn't display with an HDMI connection
Mavic Pro Firmware Update Version: v01.03.0500
Release Date : 2017.03.02
- Updated No-Fly Zone management
- Optimized gimbal calibration
Mavic Pro Firmware Update Version: v01.03.0400
Dji Mavic Pro Firmware Update
Release Date : 02/14/2017
- Added a self-diagnostic test function for ultrasonic sensors every time the aircraft is powered on
- Improved the Interval Mode performance
- Upgraded the D-Log color mode to extend dynamic range
- Optimized the video transmission by reducing the transmission signal loss ratio
Mavic Pro Firmware Update Version: v01.03.0200
Dji Mavic Air Software Update
Release Date : 12/26/2016
- Improved gimbal performance when flying in low temperatures
- Added Cinematic Mode for smoother the footage
Dji Mavic Air Battery Firmware Update 64 Bit
Mavic Pro Firmware Update Version: v01.03.0000
Dji Mavic Air Firmware Update
Release Date : 12/06/2016
- Added AR route display in TapFly mode when used with the DJI GO 4 app
- Added a vibration warning for the remote controller when the aircraft enters ATTI mode
- Added wind speed evaluation and a high wind speed warning
- Added more film looks and color modes (when used with the DJI GO 4 app)
- Optimized the compass algorithm to reduce switching from GPS Mode to ATTI Mode
- Improved magnetic detection for the remote controller. The aircraft will now return to home when strong magnetic interference is detected
- Improved the speed at which the HD video link connection can be regained after disruption
- Optimized altitude maintenance capabilities when flying over water
- Optimized Gesture Mode
- Improved the indoor flying experience by shortening the minimum distance from an obstacle from 9 feet (3 meters) to 1 meter (3 feet)
- Optimized power management for long-term battery storage
Mavic Pro Firmware Update Version: v01.02.0900
Release Date : 11/09/2016
- Optimized Remote Controller Calibration
- Adjusted default gimbal pitch smoothing value from 10 to 15 for smoother movement
- Increased USB connection stability
- Adjusted camera color
- Fixed occasional remote control command timeout
- Fixed occasional unresponsiveness to remote controller commands
- Deleted support for using C1 or C2 button to launch the DJI GO app on iOS
Mavic Pro Firmware Update Version: v01.02.0810
Release Date : 10/23/2016
- Optimized the Return-to-Home and Landing (refer to the user manual for details)
- Reduced descent issue caused from flying indoors to outdoors
- Minimized an overheating issue resulting from not removing the gimbal clamp after powering on the aircraft
- Improved the stability of the aircraft when switching between Portrait and Landscape
- Optimized the ActiveTrack experience, keeping moving subjects in center frame more effectively and smoothing footage
- Optimized control parameters to improve the flight experience.
- Fixed occasional issue of GPS signal loss
- To solve the incorrect description of the error message, which was caused by an incorrect configuration of the parameter list
These firmware releases are just as important for the remote controller, the battery or any of the other hardware and software components of your drone. Quite a few of the Mavic Pro updates also include updates for DJI Goggles.
So far, DJI have released 16 Mavic Pro updates since it released this quadcopter. I have a list of these firmware releases below including the setting and components which were fixed in the release. DJI are more or less releasing a new Mavic update every month.
There are 2 ways to upgrade the Mavic Pro firmware and the remote controller.
You can update using the DJI Go 4 app or the DJI Assistant 2 app using a computer. You can also update the Mavic quadcopter and remote controller separately.
Below are instructions including videos for updating the Mavic Pro with DJI Assistant 2 and DJI Go 4 apps.
After the instructions, I have listed the new features and issues which have been added and resolved with each firmware release for the Mavic Pro. In fact, it is always very interesting to read the Mavic Pro firmware release notes before you install the update. The firmware release notes will tell you what the firmware will do for your Mavic whether it will fix something or add a new feature.
There is another article on how to calibrate the Mavic Pro vision sensors which are very important. The Mavic Vision Positioning System is for obstacle detection, collision avoidance, flight stability and is also critical for gesture mode to work.
If you are having issues where the Mavic disconnects from the Remote Control or DJI Go 4 app, then read our article on fixing Mavic Pro disconnects. Updating the Mavic firmware is one of the steps.
How To Update Mavic Pro Firmware
Important Notes on Firmware Updates
- Visit the DJI Mavic download page and install the DJI Go 4 App and or the DJI Assistant 2 App depending on which method of update you choose
- Make sure your Mavic Pro, remote controller and mobile device have at least 50% charge in them. However, it is best to have them fully charged
- Ensure that you have a strong internet connection without interruption for the duration of the downloading of the Mavic firmware
- Never disconnect the aircraft from the computer during the firmware update. If this happens, then the Mavic firmware update will fail. It could also corrupt the existing firmware. Then your Mavic will not fly until the correct firmware has been installed
DJI Mavic Pro Firmware Update Using DJI Assistant 2
Use the DJI Assistant 2 to update the firmware for the quadcopter and remote controller drone at the same time.
- With the remote controller and the aircraft powered off, connect the remote controller to a computer through the charging port using a micro USB cable
- Power on the Mavic Pro Remote Controller and Mavic Pro quadcopter and make sure both are connected
- Open the DJI Assistant 2 application and login to your DJI account
- Select 'Mavic Pro' and click on the 'Firmware Updates' on the left panel
- Select the firmware version that you wish to update and click on 'Upgrade'
- Click on 'Start Update'
- Wait for the firmware to be downloaded and the firmware update process will start automatically
- Reboot the Mavic Pro quadcopter and the remote controller after the firmware update is complete
Please note that firmware update may reset various Main Controller Settings, such as the RTH Altitude and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred DJI GO 4 settings, and readjust them after the update to suit your preference.
The DJI Assistant 2 software has plenty more features than updating the Mavic Pro firmware. The DJI Assistant 2 Mavic software can be used to upload data, analyze black box logs, calibrate sensors, modify the Mavic and simulate flight. You can read more on the Mavic Pro Assistant 2 software here.
Notes on Updating the Mavic Pro Using DJI Assistant 2
- The Mavic Pro remote controller and the quadcopter can be updated separately.
- If you want to just update the Mavic Pro quadcopter, you would just connect the quadcopter to the computer using the micro USB port on the quadcopter.
- The firmware update will take about 15 minutes.
This video shows you exactly how to upgrade the Mavic pro to the latest firmware release using the DJI Assistant 2 app. It shows you also how you can upgrade the Mavic remote controller separately.
DJI Mavic Pro And RC Firmware Update Using DJI Go 4 App
Follow these instructions to update the Mavic Pro firmware to the latest release using the DJI Go 4 app;
- Switch off the remote controller and Mavic Pro
- Connect the remote controller to a cellphone or tablet device through the charging port using a micro USB cable
- Next power on the remote controller and the aircraft
- Open the DJI Go 4 app from your cellphone or tablet device
- Click on the 'Upgrade Now' button in the top right of your screen which is highlighted in red
- Click on the blue 'Download Now' button which will start to download the latest firmware release from DJI
- When the Mavic firmware file has completely downloaded, click on the blue 'Start Update' button which appears further down the screen
- When the upgrade process has finished, click the blue 'Complete' button at the bottom of the screen which will finish the process
The firmware update should take 5 minutes for the Remote Controller and 10 minutes for the Mavic Pro quadcopter.
Please note that firmware update may reset various Main Controller Settings, such as the RTH Altitude and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred DJI GO 4 settings, and readjust them after the update to suit your preference.
NOTE: If you need any components or accessories for your quadcopter, then check out our DJI Mavic Pro parts, upgrades and accessories page.
Here is an excellent video which shows you how easy it is to update the Mavic Pro firmware using the DJI Go 4 app.
DJI Mavic Pro Care Refresh
The Mavic Pro Care Refresh provides two replacement units for a small additional charge in one year and covers a wide variety of accidents, giving you greater peace of mind. Click on the below link to read the FAQ and pricing.
Previous DJI Mavic Pro Firmware Update Releases
Dji Mavic Air Controller Firmware
Below are listed the Mavic Pro firmware version released to date. It is very interesting to read about the new features which have been added and also various bugs and issues which were also resolved by updating the Mavic software.
Mavic Pro Firmware Update Version v01.04.0300
Release Date : 2018.02.09
- Fixed an issue that prevented J+R format photos from being downloaded.
Firmware is also an update for DJI Goggles;
- Added support for Mavic Air: Support for Head Tracking (requires Mavic Air remote controller firmware v01.00.0100 or later); support for shooting and viewing Pano photos; and support for downloading and viewing photos and videos.
Mavic Pro Firmware Update Version v01.04.0200
Dji Mavic Air Battery Firmware Updater
Release Date : 2018.01.11
- Pano photos are able to be viewed through the DJI Goggles
- Optimized the startup music for Mavic Pro Platinum
Firmware is also an update for DJI Goggles;
- Added support for playing local videos
- Added support for viewing local Pano photos
- Added support for downloading and viewing Pano photos from Mavic Pro
Mavic Pro Firmware Update Version v01.04.0100
Release Date : 2017.11.23
- Added Pano shooting modes (requires DJI GO 4 app v4.1.18 or higher)
- Optimized GEO Zone management
- Optimized Intelligent Flight Battery firmware updating
- Improved flight performance when using propeller guards
Firmware is also an update for DJI Goggles;
- Fixed an occasional issue where the SD card could format abnormally after linking
- Fixed an occasional issue where the linking status LED turned off after powering on
Mavic Pro Firmware Update Version v01.04.0000
Release Date : 2017.09.19
Dji Mavic Air 2 Battery Firmware Update
- Added QuickShot feature (requires DJI GO 4 app v4.1.10 or higher)
- Added Dynamic Home Point for ActiveTrack mode (requires DJI GO 4 app v4.1.10 or higher)
- Added support for Mavic Pro Platinum firmware and 8331 Low-Noise Quick Release Propellers
- Adjusted the color in Normal mode to Vivid (requires DJI GO 4 app v4.1.10 or higher)
Firmware is also an update for DJI Goggles:
- Adjusted the startup volume to be the same as the settings volume
Mavic Pro Firmware Update Version v01.03.1000
Release Date : 2017.08.22
- Fixed an occasional issue where DNG files couldn't be opened
- Fixed an occasional issue where the camera would restart automatically during recording
- Fixed an occasional issue where the gimbal would drift after self-checking
- Limited the max descend speed to 2 m/s and max ascend speed to 3 m/s in Propeller Cage mode
- Improved image quality
Firmware is also an update for DJI Goggles:
- Added Head Tracking for Spark (with firmware v01.00.0600 or later), the Inspire 2 (with firmware v01.01.0200 or later) and the Phantom 4 (with aircraft firmware v2.0.0.16 or later and remote controller firmware 1.9.3)
- Added remote controller signal strength icon
- Optimized audio quality
Mavic Pro Firmware Update Version v01.03.0900
Release Date : 2017.06.22
- Fixed DNG file white balance issues when shooting in Portrait mode
- Updated the user interface to indicate aircraft nose positioning when using Head Tracking Gimbal and aircraft range when using Head Tracking Flight
- Added imperial units and camera grids as options
- Fixed an issue where certain Camera View information wouldn't display with an HDMI connection
Mavic Pro Firmware Update Version: v01.03.0500
Release Date : 2017.03.02
- Updated No-Fly Zone management
- Optimized gimbal calibration
Mavic Pro Firmware Update Version: v01.03.0400
Dji Mavic Pro Firmware Update
Release Date : 02/14/2017
- Added a self-diagnostic test function for ultrasonic sensors every time the aircraft is powered on
- Improved the Interval Mode performance
- Upgraded the D-Log color mode to extend dynamic range
- Optimized the video transmission by reducing the transmission signal loss ratio
Mavic Pro Firmware Update Version: v01.03.0200
Dji Mavic Air Software Update
Release Date : 12/26/2016
- Improved gimbal performance when flying in low temperatures
- Added Cinematic Mode for smoother the footage
Dji Mavic Air Battery Firmware Update 64 Bit
Mavic Pro Firmware Update Version: v01.03.0000
Dji Mavic Air Firmware Update
Release Date : 12/06/2016
- Added AR route display in TapFly mode when used with the DJI GO 4 app
- Added a vibration warning for the remote controller when the aircraft enters ATTI mode
- Added wind speed evaluation and a high wind speed warning
- Added more film looks and color modes (when used with the DJI GO 4 app)
- Optimized the compass algorithm to reduce switching from GPS Mode to ATTI Mode
- Improved magnetic detection for the remote controller. The aircraft will now return to home when strong magnetic interference is detected
- Improved the speed at which the HD video link connection can be regained after disruption
- Optimized altitude maintenance capabilities when flying over water
- Optimized Gesture Mode
- Improved the indoor flying experience by shortening the minimum distance from an obstacle from 9 feet (3 meters) to 1 meter (3 feet)
- Optimized power management for long-term battery storage
Mavic Pro Firmware Update Version: v01.02.0900
Release Date : 11/09/2016
- Optimized Remote Controller Calibration
- Adjusted default gimbal pitch smoothing value from 10 to 15 for smoother movement
- Increased USB connection stability
- Adjusted camera color
- Fixed occasional remote control command timeout
- Fixed occasional unresponsiveness to remote controller commands
- Deleted support for using C1 or C2 button to launch the DJI GO app on iOS
Mavic Pro Firmware Update Version: v01.02.0810
Release Date : 10/23/2016
- Optimized the Return-to-Home and Landing (refer to the user manual for details)
- Reduced descent issue caused from flying indoors to outdoors
- Minimized an overheating issue resulting from not removing the gimbal clamp after powering on the aircraft
- Improved the stability of the aircraft when switching between Portrait and Landscape
- Optimized the ActiveTrack experience, keeping moving subjects in center frame more effectively and smoothing footage
- Optimized control parameters to improve the flight experience.
- Fixed occasional issue of GPS signal loss
- To solve the incorrect description of the error message, which was caused by an incorrect configuration of the parameter list
